New Items - German Tanks 28mm 1/48 Scale

British

American

German

French

Welcome to our Range of 1/48 Scale German Tanks

 
   

Tiger 1 Early - 28mm 1/48 Scale

The Tiger I was equip with the awesome 88mm main gun, 100mm thick armor at the front, 80mm armor on the sides, and a 650hp Maybach engine, the Tiger I is widely considered to be the most powerful and sophisticated tank of its time. Henschel produced over 1,300 Tiger I heavy tanks during the period of the war.

Supplied unpainted - £27

   

Tiger 1 Early Zimmerit - 28mm 1/48 Scale

The Tiger I was equip with the awesome 88mm main gun, 100mm thick armor at the front, 80mm armor on the sides, and a 650hp Maybach engine, the Tiger I is widely considered to be the most powerful and sophisticated tank of its time.

Supplied unpainted - £27

   

Panther G - 28mm 1/48 Scale

Armed with a deadly 75mm gun that was even more powerful than the 88mm, the Panther was a fast, well-armoured and heavily armed.

Supplied unpainted - £27

   

Panther G Skirts - 28mm 1/48 Scale

Armed with a deadly 75mm gun that was even more powerful than the 88mm, the Panther was a fast, well-armoured and heavily armed.

Supplied unpainted - £27

   

Panzer III L - 28mm 1/48 Scale

Armament of the Panzer III L consisted of an improved, long barreled Kwk50 L/60 tank gun, which was effective against Russian T34 tanks, plus two 7.92mm MG34 machine guns. Front armor thickness was increased to 57mm, and 20mm thick spaced armor was added to the gun mantlet as well. 

Supplied unpainted - £23

   

Panzer III N - 28mm 1/48 Scale

The Panzer III Ausf. N was armed with the short 7.5cm L/24 gun .

Supplied unpainted - £23

   
marder

Marder 2 - 28mm 1/48 Scale

The Marder II came in two major versions. The first version Marder II (Sd.Kfz. 132) was based on the light Panzer II Ausf. D/E and Flammpanzer II chassis with Christie suspension. It was armed with captured Soviet 7.62 cm guns, re-chambered to accept German 7.5 cm Pak 40 ammunition, which improved its penetrative capabilities. These early Marder IIs had a very high silhouette (2.60 m high), thin armor of only 30 mm (front) and 10 to 15 mm (sides). There was no armour on the top or rear, leaving the crew with very little protection. Alkett and Wegmann produced 201 Marder II (Sd. Kfz. 132) from early 1942 to early 1943.

Supplied Unpainted = £23

   

Panzer III J - 28mm 1/48 Scale

The Panzer III became obsolete in this role and for most purposes was supplanted by the Panzer IV. From 1942, the last version of Panzer III mounted the 7.5 cm KwK 37 L/24, better suited for infantry support. Production of the Panzer III ended in 1943. However, the Panzer III's capable chassis provided hulls for the Sturmgeschütz III until the end of the war.

Supplied unpainted - £23

   

Panzer IV G - 28mm 1/48 Scale

The Panzer IV was not originally intended to engage enemy armor—that function was performed by the lighter Panzer III. However, with the flaws of pre-war doctrine becoming apparent and in the face of Soviet T-34 tanks, the Panzer IV soon assumed the tank-fighting role of its increasingly obsolete cousin. The most widely manufactured and deployed German tank of the Second World War, the Panzer IV was used as the base for many other fighting vehicles, including the Sturmgeschütz IV assault gun, Jagdpanzer IV tank destroyer, the Wirbelwind self-propelled anti-aircraft weapon, and the Brummbär self-propelled gun.

Supplied unpainted - £25

   

Neu 250/1 Halftrack 28mm 1/48 Scale

The Sd.Kfz.250 was a light armoured halftrack, very similar in appearance to the larger Hanomag-designed Sd.Kfz. 251, and built by the DEMAG firm, for use by Nazi Germany in World War II.

Supplied unpainted - £23

   

Maus 28mm 1/48 Scale

Panzerkampfwagen VIII Maus The complete vehicle was 10.2 metres (33 ft 6 in) long, 3.71 metres (12 ft 2 in) wide and 3.63 metres (11.9 ft) tall. Weighing 200 metric tons, the Maus's main armament was a 128 mm KwK 44 L/55 gun (55 calibers long barrel), based on the 12.8 cm Pak 44 anti-tank artillery piece also used in the casemate-type Jagdtiger tank destroyer, with an added coaxial 75 mm gun. The 128 mm gun was powerful enough to destroy all enemy armored fighting vehicles at close or medium ranges, and even some at ranges exceeding 3,500 metres

Supplied Unpainted = £59.99

 

   

Panzer II 28mm 1/48 Scale

The Panzer II was designed before the experience of the Spanish Civil War of 1936-39 showed that shell-proof armor was required for tanks to survive on a modern battlefield. Prior to that, armor was designed to stop machinegun fire and High Explosive shell fragments.The Panzer II A, B, and C had 14 mm of slightly sloped homogenous steel armor on the sides, front, and back, with 10 mm of armor on the top and bottom. Many IIC were given increased armor in the front. Starting with the D model, the front armor was increased to 30 mm. The Model F had 35 mm front armour and 20 mm side armor.

Supplied Unpainted = £11.50

   

Panzer 4 Ausf F1 28mm 1/48 Scale

Production of the Panzer IV Ausf. F started. It featured 50 mm (1.97 in) single-plate armor on the turret and hull, as opposed to the appliqué armor added to the Ausf. E and a further increase in side armor to 30 mm (1.18 in). The weight of the vehicle was now 22.3 tonnes (24.6 short tons), which required a corresponding modification of track width from 380 to 400 mm (14.96 to 15.75 in) to reduce ground pressure.

Supplied Unpainted = £25

   

Panzer 4 Ausf F2 28mm 1/48 Scale

The Ausf. F tanks that received the new, longer, KwK 40 L/43 gun were temporary named Ausf. F2 (with the designation Sd.Kfz. 161/1). The tank increased in weight to 23.6 tonnes (26.0 short tons). Three months after beginning production, the Panzer IV Ausf. F2 was renamed Ausf. G.

Supplied Unpainted = £25

   

StuG III Ausf. G 28mm 1/48 Scale

There where 8423 StuG III Ausf. G produced, 142 built on Panzer III Ausf. M chassis, 173 converted from Panzer III): The final and by far the most common of the StuG series. Upper superstructure was widened: welded boxes on either sides were abandoned. This new superstructure design increased its height to 2160mm. Backside wall of the fighting compartment got straightened, and ventilation fan on top of the superstructure was relocated to the back of fighting compartment.

Supplied Unpainted = £25

   

StuH 42 28mm 1/48 Scale

In 1942, a variant of the StuG III Ausf. F was designed with a 105 mm (4.1 in) howitzer instead of the 7.5 cm StuK 40 L/43 cannon. These new vehicles, designated StuH 42 (Sturmhaubitze 42, Sd.Kfz 142/2), were designed to provide infantry support with the increased number of StuG III Ausf. F/8 and Ausf. Gs being used in the anti-tank role. The StuH 42 mounted a variant of the 10.5 cm leFH 18howitzer, modified to be electrically fired and fitted with a muzzle brake.

Supplied Unpainted = £23

   

Panzer II Flamm "Flamingo" 28mm 1/48 Scale

Based on the same suspension as the Ausf. D and Ausf. E tank versions, the Flamm (also known as "Flamingo") used a new turret mounting a single MG34 machine gun, and two remotely controlled flamethrowers mounted in small turrets at each front corner of the vehicle. Each flamethrower could cover the front 180° arc, while the turret traversed 360°.

Supplied Unpainted = £23


   

Panzer II Ausf F - 28mm 1/48 Scale

Continuing the conventional design of the Ausf. C, the Ausf. F was designed as a reconnaissance tank and served in the same role as the earlier models.

There was some minor alteration of the suspension and a new commander's cupola as well.

Supplied Unpainted = £23

   

StuG III Ausf. G 28mm in Zimmerit - 1/48 Scale

There where 8423 StuG III Ausf. G produced, 142 built on Panzer III Ausf. M chassis, 173 converted from Panzer III): The final and by far the most common of the StuG series. Upper superstructure was widened: welded boxes on either sides were abandoned. This model is fitted with Schützen and has Zimmerit paste applied to the main body of the vehicle.

Supplied Unpainted = £23

 
   

251/1 Ausf D Halftrack - 1/48 Scale

Sd.Kfz. 251s were the most widely produced German half-tracks of the war, with at least 15,252 vehicles and variants produced by various manufacturers, and were commonly referred to simply as "Hanomags" by both German and Allied soldiers

Supplied Unpainted (figure not included) = £23

   

Pak 40 anti tank gun - 1/48 scale

The 7.5 cm Pak 40 (7,5 cm Panzerabwehrkanone 40) was a German 75 millimetre anti-tank gun developed in 1939-1941 by Rheinmetall and used during the Second World War. The Pak 40 formed the backbone of German anti-tank guns for the latter part of World War II.

Supplied Unpainted = £18.00

   

Panzer III G - 28mm 1/48 Scale

The Panzer III became obsolete in this role and for most purposes was supplanted by the Panzer IV. From 1942, the last version of Panzer III mounted the 7.5 cm KwK 37 L/24, better suited for infantry support. Production of the Panzer III ended in 1943. However, the Panzer III's capable chassis provided hulls for the Sturmgeschütz III until the end of the war.

Supplied Unpainted = £23

   

250/1 Alte Halftrack - 28mm 1/48 Scale

The vehicle was used in a wide variety of roles throughout World War II. The basic troop carrier version was used as anarmored personnel carrier for reconnaissance units, carrying scout sections. This basic variant usually mounted one or twoMG34 machineguns.

Supplied Unpainted = £23

 
   
.

250/1 Alte Halftrack Platoon - 28mm 1/48 Scale

The vehicle was used in a wide variety of roles throughout World War II. The basic troop carrier version was used as anarmored personnel carrier for reconnaissance units, carrying scout sections. This basic variant usually mounted one or twoMG34 machineguns.

3 x Supplied Unpainted = £60

   

SdKfz. 222 - 28mm 1/48 Scale

This version of the vehicle was armed with a 2 cm KwK 30 L/55 autocannon and a 7.92 mm MG34 machine gun. Crew increased to three by the addition of a gunner, relieving the commander of that task. Some versions included a 28 mm anti-tank cannon.

Supplied Unpainted = £23

   
.

SdKfz. 222 Platoon - 28mm 1/48 Scale

This version of the vehicle was armed with a 2 cm KwK 30 L/55 autocannon and a 7.92 mm MG34 machine gun. Crew increased to three by the addition of a gunner, relieving the commander of that task. Some versions included a 28 mm anti-tank cannon.

3 x Supplied Unpainted = £60

   

Panther G in Zimmerit - 28mm 1/48 Scale

Armed with a deadly 75mm gun that was even more powerful than the 88mm, the Panther was a fast, well-armoured and heavily armed.

Comes with AA Mg & Side Skirts

Supplied unpainted - £27

251/Ausf C - 28mm 1/48 Scale

The Ausf C model had a large production run, but was quite complex to build, involving many angled plates that gave reasonable protection from small arms fire and remained in production upto early 1943.

Supplied Unpainted = £23

   

 

 

 
 
Contact Us
   
   
Site best viewed at 1024 x 768 or higher
 
This site is copyright © 2012 BlitzKrieg Miniatures.com